Reason

To use leaded products that can be welded for noise suppression in locations where printed circuit boards cannot be used

Did you know? Leaded products are chosen for this reason.

Reason 1Printed circuit boards are not required

Since lead wires are used to directly mount a capacitor to a terminal, components can be added without using a printed circuit board.
The size of the component itself is small, and can be mounted in minimum space.

Ex.: When adding a capacitor for noise suppression to a brush motor unit for cars

Ex.: When adding a capacitor for noise suppression to a brush motor unit for cars
150°C environment,A common printed circuit board,noise source,capacitor,suppressedMurata,leaded products,lead wires,welded or soldered directly,mounted directly near the noise source

Reason 2Can be welded directly to a metal terminal (bus bar, frame)

In order to directly mount a chip component to a metal terminal, it is necessary to change the design of the shape, etc. of the metal terminal according to the chip component. Furthermore, there is also a concern of cracks occurring on chip components from mechanical stress. Since leaded products can be mounted by welding, they can easily be mounted without changing the design of a metal terminal, and there is also no concern about cracking because the lead wires absorb the mechanical stress.
Murata also offers a lineup of products that can endure high-temperature environments, such as lead type multilayer ceramic capacitors, that can be used in conditions over 150°C if only for a short time.

Mounting methods ,soldering, conductive adhesive, welding,cracks,chipleaded products,lead wires,welded ,soldered,guaranteed for high temperatures of 150°C

Reason 3Material of lead wires can be changed to copper

In the standard catalog specifications, CP wire (copper plated steel wire) is indicated as the material of the lead wire; however, it can be changed to copper wire.
* Contact Murata regarding welding conditions.

Reason 4Quick provision of data regarding surge and ESD of car components

ISO7637-2,Surge Test: Pulse 3a

For locations where printed circuit boards cannot be used
Select a leaded product

For example, leaded products with such merits are selected in the designs of cars where electronization is advancing. In recent years, space-saving circuits and downsizing of components is being demanded for cars, along with the increase of the electronic circuits being installed.

The following page provides examples of accomplishing noise suppression, by adding lead type capacitors in a minimum space in the motor designs for cars.

To examples of adding capacitors for noise suppression in a minimum space