Man-hours for mounting can be saved by adopting lead spacing (pitch) processed products!
Did you know? Leaded products are chosen for this reason.
Reason 1Various lead spacings (pitches)* are available for selection
* Lead spacings can be selected from 2.5 mm, 5.0 mm, 7.5 mm, and 10.0 mm. Please feel free to contact Murata for other lead spacings.
- - Increases in man-hours for lead wire processing can be prevented.
- - Internal processing of lead wires where there is a concern of damage to components is no longer required.
- - When replacing components with a different lead spacing, the existing board can be used as is.
Customize lead spacings to reduce man hours for mounting.
The cases of mounting of capacitors in a minimum space, or directly mounting capacitors to a mechanical component, have been increasing along with the progression of the downsizing of equipment. For this reason, the processing technology of the lead wires according to the mounting method is becoming increasingly more important. If already processed components are used, components can be mounted easily even when processing of lead wires internally, where trouble tends to occur.
The following page provides examples of replacing a film capacitor with a ceramic capacitor without changing the board.
To examples of replacing a film capacitor with a ceramic capacitor without changing the board