Isolated Board Mount|AC-DC Converters|Power Products|Product Search|Murata Manufacturing Co., Ltd.

	Click to download data sheet or detailed product information as a PDF file.
	Stock search is available for this product. Click to open the Stock search.
	Stock search is not available for this product.
	Free sample is available for this product. Click to open the sample request page.
	Free sample is not available for this product.

For applications that do not require the particular reliability such as the general equipment

Infotainment for Automotive
The product for entertainment equipment like car navigations, car audios, and body control equipment like wipers, power windows.

Powertrain/Safety for Automotive
Product used for applications(running, turning, stopping and safety devices)which particularly concern human life, such as in devices for automobiles.
Where Murata recommends Automotive Grade components

Medical-grade products for Implanted Medical Devices
These products are intended for use in implanted medical devices such as cardiac pacemakers, cochlear implants, insulin pumps and gastric electrostimulators .
They are suitable for use in non-critical circuits .^*1

*1 Non-critical circuits
This term refers to circuits in implanted medical devices that are not directly linked to life support, i.e. circuits that will not directly endanger the life of the patient should the functionality of the device be reduced or halted by failure of the circuit.

Can be used up to 150℃ max.
* There are icons of plural temperature.

RoHS Directive compliant product

This product contain no restricted substances specified by RoHS Directive with more than maximum concentration value by weight in homogeneous material, except for cases falling under RoHS exemptions.

Restricted substances	Maximum concentration value
Lead	0.1%
Mercury	0.1%
Cadmium	0.01%
Hexavalent chromium	0.1%
Polybrominated biphenyls (PBB)	0.1%
Polybrominated diphenyl ethers (PBDE)	0.1%
Bis (2-ethylhexyl) phthalate (DEHP)	0.1%
Butyl benzyl phthalate (BBP)	0.1%
Dibutyl phthalate (DBP)	0.1%
Diisobutyl phthalate (DIBP)	0.1%

REACH Regulation compliant product:
The Product complies to provisions of REGULATION (EC) No 1907/2006 (Reach).

Restriction of the substances contained in the article under Reach:
REACH regulation impose restrictions of product applications and substance ban on the basis of Article 67.1.
The inclusion of a Substance of Very High Concern (SVHC) in the Candidate List creates the duty to communicate information on substances in articles to allow safe use of the article, which is applicable to suppliers in Europe (Reach Article 33). It does not impose any restrictions on the use of the products, nor is it a substance ban. Please check "Murata products containing SVHC and Information on safe use" .

AEC-Q200 compliant product

Products that acquired safety standard certification IEC60384-14.
Safety Standard Certification

Products that are based on the electrical appliance and material safety law of Japan.

Product of 10 to 40kV rated voltage

Low dissipation for high frequency
By devising ceramic materials and electrode materials, low dissipation is achieved in frequency bands of VHF, UHF and microwave or beyond.

Low inductance
This capacitor is designed so that the parasitic inductance component (ESL) that the capacitor has on the high frequency side becomes lower.

Product suitable for acoustic noise reduction and low distortion
This product suppresses acoustic noise, which occurs when a ceramic capacitor is used, by devising the materials and configuration.

Product resistant to deflection cracking
This capacitor is designed to prevent failures as much as possible by short mode caused by cracking when there is board deflection.

Product with solder cracking suppression
“This capacitor is configured with metal terminals and leads connected to the chip. The metal terminals and leads relieve the stress from expansion and contraction of the solder, to suppress solder cracking.”

No DC bias characteristics
Polymer capacitor is no capacitance change with DC bias due to aluminum oxidized film for dielectric.

By making full use of the water repellence of the capacitor surfaces, this product minimizes Ion migration from the external electrodes (Terminations) that results from condensation.

Low-inductance product suitable for noise suppression.
This product has extremely low ESL and is suitable for suppression of noise, including high frequencies.
Contributes to noise suppression as an EMI filter

Product for reflow soldering

Product for flow soldering

Limited to Conductive Glue Mounting
Since silver palladium is used for the external electrodes,the capacitor can be mounted by conductive adhesive.

Product for bonding
Since gold is used for the external electrodes, the capacitor can be mounted by die bonding/wire bonding.

Product for welding
Capacitor configured with lead electrodes and can be mounted by welding. Please contact us about the lead wire material.

Product dedicated for screw fixing

For applications that do not require the particular reliability such as the general equipment

The product for entertainment equipment like car navigations, car audios, and body control equipment like wipers, power windows.

The product for high reliability applications like powertrain and safety, in addition to infortainment applications.

AEC-Q200 compliant product (* Deviation may be submitted. Please contact us for details.)

Can be used up to 155oC Max.
* There are icons of plural temperature.

Restricted substances	Maximum concentration value
Lead	0.1%
Mercury	0.1%
Cadmium	0.01%
Hexavalent chromium	0.1%
Polybrominated biphenyls (PBB)	0.1%
Polybrominated diphenyl ethers (PBDE)	0.1%
Bis (2-ethylhexyl) phthalate (DEHP)	0.1%
Butyl benzyl phthalate (BBP)	0.1%
Dibutyl phthalate (DBP)	0.1%
Diisobutyl phthalate (DIBP)	0.1%

Wound structure inductor which has ferrite material core.
→Detailed explanation

Wound structure inductor.
The use of magnetic iron powder ensure capability for large current.
→Detailed explanation

Wound structure inductor.
Using non-magnetic core like alumina material, shows high performance in high frequency range.
→Detailed explanation

Inductor of the film structure.
→Detailed explanation

Inductor of the multilayer structure.
→Detailed explanation

Less space by "2 coils in 1unit" structure inductor.

Low DC resistance type

Bias current characteristics improved

High Q type

Tight inductance tolerance available

Reflow soldering applicable

Flow soldering applicable

	AEC-Q200 compliant product (* Deviation may be submitted. Please contact us for details.)

	For applications that do not require the particular reliability such as the general equipment
	Infotainment for Automotive The product for entertainment equipment like car navigations, car audios, and body control equipment like wipers, power windows.
	Powertrain/Safety for Automotive Product used for applications(running, turning, stopping and safety devices)which particularly concern human life, such as in devices for automobiles. Where Murata recommends Automotive Grade components
	Medical-grade products for Implanted Medical Devices These products are intended for use in implanted medical devices such as cardiac pacemakers, cochlear implants, insulin pumps and gastric electrostimulators . They are suitable for use in non-critical circuits .^1 1 Non-critical circuits This term refers to circuits in implanted medical devices that are not directly linked to life support, i.e. circuits that will not directly endanger the life of the patient should the functionality of the device be reduced or halted by failure of the circuit.

	Products that acquired safety standard certification IEC60384-14. Safety Standard Certification
	Products that are based on the electrical appliance and material safety law of Japan.

*1 Capacitance change is specified with 50% rated voltage applied.
*2 Rated Voltage 100Vdc max : 25 to 85℃
*3 Range of capacitance change rate with 50% rated voltage applied (See Detailed specifications sheet) .

Class	Temperature Characteristic Codes			Temp characteristics			Capacitance Change at Each Temperature (%)
	Public STD	Public STD Code	Code	Reference Temperature	Temperature Range	Capacitance Change or Temperature Coefficient	-55℃		-25℃		-10℃
	Public STD	Public STD Code	Code	Reference Temperature	Temperature Range	Capacitance Change or Temperature Coefficient	Max.	Min.	Max.	Min.	Max.	Min.
Temperature compensating type	JIS	CG	1C	20℃	20～125℃	0±30ppm/℃	0.54	-0.23	0.33	-0.14	0.22	-0.09
		CH	2C	20℃	20～125℃	0±60ppm/℃	0.82	-0.45	0.49	-0.27	0.33	-0.18
		CJ	3C	20℃	20～125℃	0±120ppm/℃	1.37	-0.9	0.82	-0.54	0.55	-0.36
		CK	4C	20℃	20～125℃	0±250ppm/℃	2.56	-1.88	1.54	-1.13	1.02	-0.75
		UJ	3U	20℃	20～85℃	-750±120ppm/℃	-	-	4.94	2.84	3.29	1.89
		SL	1X	20℃	20～85℃	+350～-1000ppm/℃	-	-	-	-	-	-
	Murata Temperature Characteristic Code	CHA	0C	20℃	20～150℃	0±60ppm/℃	0.82	-0.45	0.49	-0.27	0.33	-0.18
		ZLM	9E	20℃	-55～-40℃	-4700+1000/-2500ppm/℃	-	-	-	-	-	-
					-40～20℃	-5350±750ppm/℃
					20～85℃	-4700±500ppm/℃
					85～125℃	-4700+2000/-1000ppm/℃
	EIA	C0G	5C	25℃	25～125℃	0±30ppm/℃	0.58	-0.24	0.4	-0.17	0.25	-0.11
		U2J	7U	25℃	25～125℃ *2	-750±120ppm/℃	8.78	5.04	6.04	3.47	3.84	2.21
		UNJ	7J	25℃	-55℃～25℃	-750+120/-347ppm/℃	-	-	-	-	-	-
					25℃～125℃	-750±120ppm/℃
					125℃～200℃	-750+347/-120ppm/℃
	Murata Temperature Characteristic Code	CCG	7G	25℃	-55～25℃	0+30/-72ppm/℃	-	-	-	-	-	-
					25～125℃	0±30ppm/℃
					125～200℃	0+72/-30ppm/℃
		X8G	5G	25℃	25～150℃	0±30ppm/℃	0.58	-0.24	0.4	-0.17	0.25	-0.11
High Dielectric Constant type	JIS	B*1	B1	20℃	-25～85℃	±10%	-	-	-	-	-	-
		B	B3	20℃	-25～85℃	±10%	-	-	-	-	-	-
		E	E3	20℃	-25～85℃	+20, -55%	-	-	-	-	-	-
		R*1	R1	20℃	-55～125℃	±15%	-	-	-	-	-	-
		R*1	R8	20℃	-25～85℃	±15%	-	-	-	-	-	-
	EIA	X5R	R6	25℃	-55～85℃	±15%	-	-	-	-	-	-
		X5S	C6	25℃	-55～85℃	±22%	-	-	-	-	-	-
		X6S	C8	25℃	-55～105℃	±22%	-	-	-	-	-	-
		X6T	D8	25℃	-55～105℃	+22, -33%	-	-	-	-	-	-
		X7R	R7	25℃	-55～125℃	±15%	-	-	-	-	-	-
		X7R	Z7	25℃	-55～125℃	±15% *3	-	-	-	-	-	-
		X7S	C7	25℃	-55～125℃	±22%	-	-	-	-	-	-
		X7T	D7	25℃	-55～125℃	+22, -33%	-	-	-	-	-	-
		X7U	E7	25℃	-55～125℃	+22, -56%	-	-	-	-	-	-
		X8R	R9	25℃	-55～150℃	±15%	-	-	-	-	-	-
	Murata Temperature Characteristic Code	X8L	L8	25℃	-55～150℃	+15, -40%	-	-	-	-	-	-
		X8M	M8	25℃	-55～150℃	+15, -50%	-	-	-	-	-	-
		X9Q	Q9	25℃	-55～200℃	+15, -70%	-	-	-	-	-	-

	Can be used up to 155℃ max. * There are icons of plural temperature.

	SMD 2 terminal type
	SMD Metal terminal type The metal terminals are connected to the external electrodes of a 2 terminal capacitor. Stress is relieved and the vibration of the capacitor is absorbed by the elastic action of the metal terminals.
	SMD Multi terminal type There are 8 and 10 terminal types. This capacitor achieves an even lower inductance.
	SMD LW reversed type The electrodes of this 2 terminal capacitor are configured in the longitudinal direction (LT side) of the chip, unlike the electrode positions (WT side) of a common 2 terminal capacitor.
	SMD Top & bottom electrode type This capacitor is configured with top/bottom electrodes. Gold is used as the electrode material, and die bonded/wire bonding mounting are possible.
	SMD on substrates 2 terminal capacitors are mounted on the interposer substrates. Having no direct contact with solder and substrates reduces noise.
	SMD 3-Terminal Capacitors
	Resin Molding SMD Type IEC60384-14 X1/Y1 Class Certified Product.

	Product of 10 to 40kV rated voltage
	Low dissipation for high frequency By devising ceramic materials and electrode materials, low dissipation is achieved in frequency bands of VHF, UHF and microwave or beyond.
	Low inductance This capacitor is designed so that the parasitic inductance component (ESL) that the capacitor has on the high frequency side becomes lower.
	Product suitable for acoustic noise reduction and low distortion This product suppresses acoustic noise, which occurs when a ceramic capacitor is used, by devising the materials and configuration.
	Product resistant to deflection cracking This capacitor is designed to prevent failures as much as possible by short mode caused by cracking when there is board deflection.
	Product with solder cracking suppression “This capacitor is configured with metal terminals and leads connected to the chip. The metal terminals and leads relieve the stress from expansion and contraction of the solder, to suppress solder cracking.”
	No DC bias characteristics Polymer capacitor is no capacitance change with DC bias due to aluminum oxidized film for dielectric.
	By making full use of the water repellence of the capacitor surfaces, this product minimizes Ion migration from the external electrodes (Terminations) that results from condensation.
	Low-inductance product suitable for noise suppression. This product has extremely low ESL and is suitable for suppression of noise, including high frequencies. Contributes to noise suppression as an EMI filter

	Product for reflow soldering
	Product for flow soldering
	Limited to Conductive Glue Mounting Since silver palladium is used for the external electrodes,the capacitor can be mounted by conductive adhesive.
	Product for bonding Since gold is used for the external electrodes, the capacitor can be mounted by die bonding/wire bonding.
	Product for welding Capacitor configured with lead electrodes and can be mounted by welding. Please contact us about the lead wire material.

	Wound structure inductor which has ferrite material core. →Detailed explanation
	Wound structure inductor. The use of magnetic iron powder ensure capability for large current. →Detailed explanation
	Wound structure inductor. Using non-magnetic core like alumina material, shows high performance in high frequency range. →Detailed explanation
	Inductor of the film structure. →Detailed explanation
	Inductor of the multilayer structure. →Detailed explanation
	Less space by "2 coils in 1unit" structure inductor.

	Products under development. Listed product specifications are subject to change without prior notice. Please contact us for sample availability and mass production schedule.
	Product is in mass production.
	Not recommended for new design.
	We are planning to discontinue production of this item. 'Last Time Buy' date or Discontinuation date may be shown on our web site. Before these dates, please contact us with your requirements.
	Production of this product has stopped.

	Murata particularly recommends this product for reasons of size and performance. Please contact Murata regarding pricing and delivery.

For applications that do not require the particular reliability such as the general equipment

The product for entertainment equipment like car navigations, car audios, and body control equipment like wipers, power windows.

The product for high reliability applications like powertrain and safety, in addition to infortainment applications.

AEC-Q100 compliant product

AEC-Q200 compliant product (* Deviation may be submitted. Please contact us for details.)

Can be used up to 155oC Max.
* There are icons of plural temperature.

Restricted substances	Maximum concentration value
Lead	0.1%
Mercury	0.1%
Cadmium	0.01%
Hexavalent chromium	0.1%
Polybrominated biphenyls (PBB)	0.1%
Polybrominated diphenyl ethers (PBDE)	0.1%
Bis (2-ethylhexyl) phthalate (DEHP)	0.1%
Butyl benzyl phthalate (BBP)	0.1%
Dibutyl phthalate (DBP)	0.1%
Diisobutyl phthalate (DIBP)	0.1%

Wound structure inductor which has ferrite material core.
→Detailed explanation

Wound structure inductor.
The use of magnetic iron powder ensure capability for large current.
→Detailed explanation

Wound structure inductor.
Using non-magnetic core like alumina material, shows high performance in high frequency range.
→Detailed explanation

Inductor of the film structure.
→Detailed explanation

Inductor of the multilayer structure.
→Detailed explanation

Less space by "2 coils in 1unit" structure inductor.

Low DC resistance type

Bias current characteristics improved

High Q type

Tight inductance tolerance available

Reflow soldering applicable

Flow soldering applicable

For applications that do not require the particular reliability such as the general equipment

Infotainment for Automotive
The product for entertainment equipment like car navigations, car audios, and body control equipment like wipers, power windows.

Powertrain/Safety for Automotive
Product used for applications(running, turning, stopping and safety devices)which particularly concern human life, such as in devices for automobiles. Where Murata recommends Automotive Grade components

Can be used up to 150℃ max.
* There are icons of plural temperature.

Restricted substances	Maximum concentration value
Lead	0.1%
Mercury	0.1%
Cadmium	0.01%
Hexavalent chromium	0.1%
Polybrominated biphenyls (PBB)	0.1%
Polybrominated diphenyl ethers (PBDE)	0.1%
Bis (2-ethylhexyl) phthalate (DEHP)	0.1%
Butyl benzyl phthalate (BBP)	0.1%
Dibutyl phthalate (DBP)	0.1%
Diisobutyl phthalate (DIBP)	0.1%

AEC-Q200 compliant product

Products that acquired safety standard certification IEC60384-14.
Safety Standard Certification

AEC-Q100 compliant product

Products that are based on the electrical appliance and material safety law of Japan.

Low dissipation for high frequency
By devising ceramic materials and electrode materials, low dissipation is achieved in frequency bands of VHF, UHF and microwave or beyond.

Low inductance
This capacitor is designed so that the parasitic inductance component (ESL) that the capacitor has on the high frequency side becomes lower.

Product suitable for acoustic noise reduction and low distortion
This product suppresses acoustic noise, which occurs when a ceramic capacitor is used, by devising the materials and configuration.

Fail safe product
This capacitor is designed to prevent failures as much as possible by short mode.

Product resistant to deflection cracking
This capacitor is designed to prevent failures as much as possible by short mode caused by cracking when there is board deflection.

No DC bias characteristics
Polymer capacitor is no capacitance change with DC bias due to aluminum oxidized film for dielectric.

By making full use of the water repellence of the capacitor surfaces, this product minimizes Ion migration from the external electrodes (Terminations) that results from condensation.

Product for reflow soldering

Product for flow soldering

Limited to Conductive Glue Mounting
Since silver palladium is used for the external electrodes,the capacitor can be mounted by conductive adhesive.

Product for bonding
Since gold is used for the external electrodes, the capacitor can be mounted by die bonding/wire bonding.

Product for welding
Capacitor configured with lead electrodes and can be mounted by welding. Please contact us about the lead wire material.

	Products under development. Listed product specifications are subject to change without prior notice. Please contact us for sample availability and mass production schedule.
	Product is in mass production.
	Not recommended for new design.
	We are planning to discontinue production of this item. 'Last Time Buy' date or Discontinuation date may be shown on our web site. Before these dates, please contact us with your requirements.
	Production of this product has stopped.

	Murata particularly recommends this product for reasons of size and performance. Please contact Murata regarding pricing and delivery.

	This is a new product. Please contact Murata regarding pricing and delivery.

	Can be used up to 150℃ max. * There are icons of plural temperature.

	For applications that do not require the particular reliability such as the general equipment
	The product for entertainment equipment like car navigations, car audios, and body control equipment like wipers, power windows.
	The product for high reliability applications like powertrain and safety, in addition to infortainment applications.