Enter a product part number, or a portion of a part number.

    Select your region & language

    Electronic Components
    1. HOME
    2. Design Tools
    3. Design Support Data
    4. S-Parameter
    5. Ferrite Beads
    Design Support Data

    S-ParameterFerrite Beads

    This page provides the S-parameters of ferrite beads which are an EMI suppression filter.

    Download from SimSurfing

    You can download the data of multiple selected part numbers at once.

    Download from SimSurfing

    PLEASE CAREFULLY READ THE FOLLOWING RESTRICTIONS BEFORE USING DATA ABOUT THE PRODUCTS ("DATA").
    IF YOU DO NOT AGREE TO THE RESTRICTIONS, PLEASE DO NOT USE THE DATA. USE OF ANY PART OF THE DATA INDICATES YOUR COMPLETE AND UNCONDITIONAL ACCEPTANCE OF THE RESTRICTIONS SET FORTH BELOW.

    Swipe up or down to change screens

    Restrictions on the use of the DATA

    1. You shall not use the DATA for any purpose other than the confirmation of characteristics of the products and the electrical simulation using electronic circuit simulator.
    2. The DATA is provided on an "AS IS" basis without warranty of any kind, either express or implied, including but not limited to the implied warranties of merchantability, fitness for a particular purpose and non-infringement of third party rights.
    3. Murata Manufacturing, Co., Ltd. ("Murata") shall not be liable for any damages, including but not limited to any lost profits, lost savings or other incidental or consequential damages, arising out of or relating to the use of or inability to use the DATA, regardless of any notice of the possibility of such damages, or for any claims made by any third party.
    4. The DATA is subject to change from time to time or products may be discontinued without notice. Please check the latest version.
    5. You acknowledge and agree that the ownership and all intellectual property rights (including but not limited to copyright) of the DATA are held by Murata. You shall not redistribute or reproduce the DATA without prior consent of Murata.
    6. For details about a product, please refer to Murata catalog or approval specifications for the product.
    Remarks :
    • Parameters shown in the DATA for S-parameters are typical values which are operated by high frequency small signal at 20 degree C. without DC current. Therefore, please note that under any other conditions above, you may not have adequate results.
    • The DATA may include the data for discontinued products. Please contact us about the latest production status.

    Last Update 2/21/2023

    Swipe left or right to change screens. View in landscape mode.
    Application Series File size
    For General BLM02 ZIP: 0.1MB
    BLM03 ZIP: 0.1MB
    BLM15 ZIP: 0.1MB
    BLM18 ZIP: 0.1MB
    BLM21 ZIP: 0.1MB
    BLM31 ZIP: 0.1MB
    BLM41 ZIP: 0.1MB
    BLE18 ZIP: 0.1MB
    BLE32 ZIP: 0.1MB
    BLF02 ZIP: 0.1MB
    BLF03 ZIP: 0.1MB
    BLT5B ZIP: 0.1MB
    NFZ2H ZIP: 0.1MB
    NFZ2M ZIP: 0.1MB
    NFZ03 ZIP: 0.1MB
    NFZ5B ZIP: 0.1MB
    NFZ15 ZIP: 0.1MB
    NFZ18 ZIP: 0.1MB
    NFZ32 ZIP: 0.1MB
    For Automotive BLM03 ZIP: 0.1MB
    BLM15 ZIP: 1.0MB
    BLM18 ZIP: 2.4MB
    BLM21 ZIP: 1.3MB
    BLM31 ZIP: 0.4MB
    BLM41 ZIP: 0.1MB
    BLE18 ZIP: 0.1MB
    BLE32 ZIP: 0.1MB
    For Automotive (infotainment) BLE18 ZIP: 0.1MB
    BLE32 ZIP: 0.1MB
    BLF03 ZIP: 0.1MB
    BLM03 ZIP: 0.8MB
    BLM15 ZIP: 1.2MB
    BLM18 ZIP: 1.7MB
    BLM21 ZIP: 0.8MB
    BLM31 ZIP: 0.2MB
    BLM41 ZIP: 0.1MB
    NFZ5B ZIP: 0.3MB
    NFZ15 ZIP: 0.1MB
    NFZ18 ZIP: 0.1MB
    NFZ32 ZIP: 0.5MB
    Download
    1. Design Tools
    2. Design Support Data
    3. S-Parameter
    1. HOME
    2. Design Tools
    3. Design Support Data
    4. S-Parameter
    5. Ferrite Beads
    PageTOP