数据中心&开放计算项目(OCP)

Murata Power Solutions为使用Open Compute Open Rack V1和V2标准的数据中心部署提供了完整的解决方案。
Murata电源机架既灵活又可配置,具有真正的21英寸OCP和19英寸EIA机架宽度,并提供高达15kW(N + 1)的钛金效率的12V直流电源以及多个模块选件,用于ATS(输入)冗余,通信和 电池升压/备份。 Murata电源机架可以与我们的Open Rack V1和V2(41OU)设备架结合使用,以支持单电源区和双电源区配置。



Power Application Notes
Power 3D Models
Power Safety Certifications


Power Discontinued/Obsolete
Power Environmental Compliance Policy
Power Operating Requirements
Part Number Status Appearance Features Description Inquiries
MWOCP74-B

recommend

productstatus

For PSU Slot MWOC Blanking Panels provide an attractive and convenient covering of unused shelf openings for the PSU modules in the MWOCES and MWDCES series OCP power shelves. Contact us
MWOCES-211-F

recommend

productstatus

Input Configuration: Three-phase five wire Wye
DC Output Busbar Configuration: Single centre mount busbar set
  • OCP compliant
  • 1OU height
  • 537(W) x 680(L) x 45(H) mm
  • 15kW total output power (N+1)1
  • Accommodates up to six PSU modules and one RMU
  • 12.3V output
  • Hot swappable
  • Equipped with two C13 2.5A/ AC Outlets
  • N+1 Redundancy
MWOCES-211 Series is a 15kW, 21" 1OU, OCP compliant power shelf that provides a delivery system for up to six 74mm wide, 1OU Power Supplies (PSU), and one Remote Management Unit (RMU) intended for 12V Power Distribution architectures Contact us
MWOCES-211-B

recommend

productstatus

Input Configuration: Three-phase five wire Wye
DC Output Busbar Configuration: Three (3) busbar sets
  • OCP compliant
  • 1OU height
  • 537(W) x 680(L) x 45(H) mm
  • 15kW total output power (N+1)1
  • Accommodates up to six PSU modules and one RMU
  • 12.3V output
  • Hot swappable
  • Equipped with two C13 2.5A/ AC Outlets
  • N+1 Redundancy
MWOCES-211 Series is a 15kW, 21" 1OU, OCP compliant power shelf that provides a delivery system for up to six 74mm wide, 1OU Power Supplies (PSU), and one Remote Management Unit (RMU) intended for 12V Power Distribution architectures Contact us
MWOCES-192-A

recommend

productstatus

Output Busbar Configuration: Multilink Busbar
Input Configuration: Three-phase Four Wire Delta
  • OCP compliant
  • 15kW Total Output Power (N+1)1
  • 2U Height
  • 444(W)x680(L)x87(H)mm
  • Accommodates up to six PSUs, two ATS modules and one RMU
  • Input redundancy can be achieved with ATS
  • 12.3V Output
  • Optional mounting kit available
  • N+1 Redundancy
  • Hot Swappable
  • Equipped with six C13 2.5A / AC outlet
  • Support external BBU (Murata battery backup system)
MWOCES-192 Series is a 19" 2U, OCP compliant power shelf that provides a delivery system for up to six 74mm wide, 1U Power Supplies (PSU), one Remote Management Unit (RMU), two Automatic Transfer Switches (ATS) intended for Power Distribution architectures. Contact us
MWOC-RMU-2

recommend

productstatus

Applicable Shelf: MWOCES / MWDCES series
  • RMU for Power Shelf Applications
  • Communicates internally via PMBus
  • Communicates externally via SNMP
  • LED Status Indicators
  • Two (2) RJ45 Connectors
The MWOC-RMU can monitor and control the power supplies and/or peripheral equipment installed in the MWOCES-211, MWOCES-192 and MWDCES-191 shelves via the PMBus, and can communicate with host system via Ethernet by SNMP. Contact us
MWOC-RMU-1

discontinue

Applicable Shelf: MWOCES series
  • RMU for Power Shelf Applications
  • Communicates internally via PMBus
  • Communicates externally via SNMP
  • LED Status Indicators
  • Two (2) RJ45 Connectors
The MWOC-RMU can monitor and control the power supplies and/or peripheral equipment installed in the MWOCES-211, MWOCES-192 and MWDCES-191 shelves via the PMBus, and can communicate with host system via Ethernet by SNMP. Contact us
MWOC-PCA-x-y-z

recommend

productstatus

  • AC Delta or Wye, 4-wire or 5-wire, 380-480Vac (nominal)
  • AC Delta, 4-wire Line-Line – 100-120Vac, 200-277Vac (nominal)
  • AC Wye, 5-wire Line-Neutral
  • 100-120Vac, 200-277Vac (nominal)
  • Customizable
MWOC-PCA-x-y-z provides the electrical connection between the Data Center Power Distribution System and the MWOCES Series Power Shelves. Each Power Shelf requires two (2) MWOC-PCA-x-y-z to operate as specified. These power cables are custom in nature and require specific information pertaining to the each individual deployment. As a point of information the “X” in the part number indicates the number of conductors required (3, 4 or 5). The “Y” indicates the length of the cable in meters. The “Z” is an alpha/numeric that is tied to the physical connector required to connect to the Data Center Power Distribution System. Please consult with us and we can assist in the determination of the actual part number. Contact us
MWOC-KIT-4

discontinue

  • Required item to mount the MWOCES-193 into a MWOCR-2141-2 (Open Rack V2)
Installations kits are available for the MWOCES-211 & MWOCES-193 Power Shelves which are required to properly mount the shelves into the MWOCR-2141-1 (Open Rack V1) and MWOCR-2141-2 (Open Rack V2) Racks. They provide the appropriate bracketry and hardware needed to properly mount the Power Shelves into the OCP Open Racks. Contact us
MWOC-KIT-3

discontinue

  • Required item to mount the MWOCES-193 into a MWOCR-2141-1 (Open Rack V1)
Installations kits are available for the MWOCES-211 & MWOCES-193 Power Shelves which are required to properly mount the shelves into the MWOCR-2141-1 (Open Rack V1) and MWOCR-2141-2 (Open Rack V2) Racks. They provide the appropriate bracketry and hardware needed to properly mount the Power Shelves into the OCP Open Racks. Contact us
MWOC-KIT-2

discontinue

  • Required item to mount the MWOCES-211 into a MWOCR-2141-2 (Open Rack V2)
Installations kits are available for the MWOCES-211 & MWOCES-193 Power Shelves which are required to properly mount the shelves into the MWOCR-2141-1 (Open Rack V1) and MWOCR-2141-2 (Open Rack V2) Racks. They provide the appropriate bracketry and hardware needed to properly mount the Power Shelves into the OCP Open Racks. Contact us
MWOC-ATS-B

recommend

productstatus

For ATS Slot MWOC Blanking Panels provide an attractive and convenient covering of unused shelf openings for the ATS modules in the MWOCES and MWDCES series OCP power shelves. Contact us
MWOC-ATS-3

recommend

productstatus

ATS bypass for 3-phase Delta Connections (without Neutral)
  • Automatic Transfer Switch (ATS) for MWOCES-192
  • Operates from AC 3-phase Delta or Wye
  • ATS function is achieved with QTY 2 ATS modules
  • Remote monitoring capability via MWOC-RMU-2
  • Hot swappable
  • LED Status Indicator
MWOC-ATS is an Automatic Transfer Switch (ATS) that work in pairs to support specific Murata shelves by providing a means to automatically switch over from one AC source to another when the selected AC source becomes unreliable or unavailable. Contact us
MWOC-ATS-1

underdevelopment

ATS switch for 3-phase Delta Connections (without Neutral)
  • Automatic Transfer Switch (ATS) for MWOCES-192
  • Operates from AC 3-phase Delta or Wye
  • ATS function is achieved with QTY 2 ATS modules
  • Remote monitoring capability via MWOC-RMU-2
  • Hot swappable
  • LED Status Indicator
MWOC-ATS is an Automatic Transfer Switch (ATS) that work in pairs to support specific Murata shelves by providing a means to automatically switch over from one AC source to another when the selected AC source becomes unreliable or unavailable. Contact us
MWDCES-191-D

recommend

productstatus

Input Configuration: HVDC
DC Ouput Busbar Configuration: Multi-link Busbar
  • 12kW total output power1 (N+1)
  • Accommodates up to five PSUs and one RMU
  • Supports external BBU (Murata battery backup system)
  • 12.3VDC output
  • Hot swappable
  • Equipped with two C13 2.5A/AC outlet 2
  • Optional mounting kit available
  • N+1 redundancy
  • Single Phase and HVDC input models
  • 1U height
  • 437(W) x 650(L) x 43.8(H) mm
MWDCES-191 series of redundant 19” 1U 12kW OCP compliant shelves provide a simple solution for 12V distributed applications that are limited by single phase AC mains or HVDC input power availability. Contact us
MWDCES-191-C

recommend

productstatus

Input Configuration: Single Phase AC
DC Ouput Busbar Configuration: Multi-link Busbar
  • 12kW total output power1 (N+1)
  • Accommodates up to five PSUs and one RMU
  • Supports external BBU (Murata battery backup system)
  • 12.3VDC output
  • Hot swappable
  • Equipped with two C13 2.5A/AC outlet 2
  • Optional mounting kit available
  • N+1 redundancy
  • Single Phase and HVDC input models
  • 1U height
  • 437(W) x 650(L) x 43.8(H) mm
MWDCES-191 series of redundant 19” 1U 12kW OCP compliant shelves provide a simple solution for 12V distributed applications that are limited by single phase AC mains or HVDC input power availability. Contact us

Murata Icon X Brochure

Data Center and Open Compute Power Solutions (PDF: 1.1 MB)

  • CAT NO.
  • UPDATE 2020/2/19
下载PDF