Multilayer Ceramic Capacitors - C-Format

This page provides the C-Format data of multilayer ceramic capacitors.

如果您不同意此使用条件,请勿使用该数据。 使用数据的任何部分则表示您完全无条件地接受以下使用条件。

Restrictions on the use of the DATA

1. You shall not use the DATA for any purpose other than the confirmation of characteristics of the products and the electrical simulation using electronic circuit simulator.


2. The DATA is provided on an "AS IS" basis without warranty of any kind, either express or implied, including but not limited to the implied warranties of merchantability, fitness for a particular purpose and non-infringement of third party rights.


3. Murata Manufacturing, Co., Ltd. ("Murata") shall not be liable for any damages, including but not limited to any lost profits, lost savings or other incidental or consequential damages, arising out of or relating to the use of or inability to use the DATA, regardless of any notice of the possibility of such damages, or for any claims made by any third party.


4. The DATA is subject to change from time to time or products may be discontinued without notice. Please check the latest version.


5. You acknowledge and agree that the ownership and all intellectual property rights (including but not limited to copyright) of the DATA are held by Murata. You shall not redistribute or reproduce the DATA without prior consent of Murata.


-The DATA is C-Format data of multilayer ceramic capacitors conforming to IEC 63055/IEEE 2401.
-The download file (zip file) include C-Format data, SPICE models and S-parameters. SPICE models and S-parameters are based on the measurement values ( high-frequency small signal operation, zero DC bias voltage, at 20 or 25 degree celsius). Therefore, please note that under any other conditions above, you may not have adequate results.
-The DATA may include the data for discontinued products. Please contact us about the latest production status.

An overview of C-Format (JEITA)
If you have any question about C-Format and/or other Format for LSI-Package-Board interoperable design, Please contact JEITA.

更新   2019/6/6

应用 系列