In recent years, switching elements, and in particular, power converters, have become able to support higher frequencies and to be driven at higher temperatures. For reasons such as these, practical applications for increasing efficiency have been promoted, which has led to a higher demand for smaller components that are compatible with high temperatures. monolithi ceramic capacitors have good impedance characteristics at high frequencies and are compatible with high temperatures. Because of these advantages, replacement with monolithi ceramic capacitors is being promoted even in areas where electrolytic capacitors and film capacitors have been traditionally used.
The following introduces the main points and advantages of replacement and an actual example.
Fig. 5 Rated Voltage and Capacitance Range
Fig. 6 Impedance Frequency Characteristics 10μF
When replacing a film or electrolytic capacitor with a monolithi ceramic capacitor, the capacity does not necessarily have to match. Because MLCCs have extremely outstanding impedance characteristics at high frequencies, they can be used even at capacities lower than that of film or electrolytic capacitors if they are on the high frequency side at around 100 kHz.
The maximum allowable working temperature of monolithi ceramic capacitors is 125°C, which makes them ideal for use in hot environments.
In applications, particularly those such as power converters, where higher efficiency is required, components have been developed to support higher frequencies and are being driven at higher temperatures. monolithi ceramic capacitors support the downsizing of circuit boards and provide greater freedom in design because of their resistance to high temperatures, which makes them suitable for use in hot environments, and their ability to be mounted closer to heat generating sources. Also, in recent years, attention has been focused on the shift over to monolithi ceramic capacitors because of the trend of using entirely SMD components to reduce mounting costs.
For example, as shown in Fig. 7, when there is a high-temperature, heat-generating source, film capacitors had to be mounted away from the heat-generating source in order to withstand the hot environment. However, by replacing traditional capacitors with monolithi ceramic capacitors, SMD components can now be mounted closer to heat-generating sources.
Fig.7 How Replacement with Monolithi Ceramic Capacitors Works
Main points in replacement with monolithi ceramic capacitors
Case 1: Replacement of a snubber capacitor film capacitor with a monolithi ceramic capacitor
The number of cases where replacement is being promoted in power converters is on the increase.
Case 2: Replacement of a smoothing capacitor electrolytic capacitor with a monolithi ceramic capacitor
Although it is highly difficult to replace because of the capacitance required, replacement in some applications has begun.
Lineup of ceramic capacitors