Silicon Capacitors FAQ Q Is it available to handle Silicon capacitor by manual solder assembly? Please also explain the point to make note.


Manual soldering of Silicon Capacitors is technicaly possible, but not recommended, especially when package size is small. If no other choice, it is recommended to use vacuum pick-up tool with a soft nozzle (e.g. Teflon, peek and conductor nylon). Please don't use metal tweezers as they may damage the chip. Please refer to application note "Recommendation to handle bare diesPDF" for details.
Depending on the amount of solder, good characteristics may not be obtained because the chip tilts or a short cut might occur. Please refer to assembly note for details.

Related terms : Silicon Capacitor(Si-Cap), Silicon IPD(Si-IPD, Integrated Passive Device), Assembly note

We appreciate your cooperation with the FAQ improvement questionnaire.
Were these FAQs helpful?

We would like to hear your opinions and requests regarding these FAQs.
Opinions from customers will be used to improve the FAQs.
We will not respond to inquiries and requests received by this form.

For product inquiries, please contact us using our contact form.