3. Configuring Regional Parameters for Indonesia AS923-2

Configuration of Regional Parameters must be done to enable the 1SJ Board to connect to the Antares IoT Platform through the regions ISM band frequency. As mentioned, the LoRaWAN Network Protocol is grouped into different regional ISM bands.
For Indonesia, the frequency is AS923-2, which will be configured below.

Tools Required

Follow these steps to configure the regional parameters.

Hardware	1SJ Development Kit
	Micro USB Cable
Software	Option#1: Keil uVision Downloaded from https://www2.keil.com/stmicroelectronics-stm32/mdk *Note: Go through the entire installation and activate the product from the link properly.
	Option#2: STM32CubeIDE Downloaded from https://www.st.com/en/development-tools/stm32cubeide.html

In this guide, Keil uVision will be used to modify the project files.

STEPS:

1. Navigation to Project file

2. Configuring Regional Parameters Project File

3. Loading Project File

4. Viewing of Transmitted Data in Virtual Terminal

PageTOP