Enter a product part number, or a portion of a part number.
Download and install TeraTerm at https://osdn.net/dl/ttssh2/teraterm-4.106.exe
Click on Serial and Select the COM Port that was shown at device manager previously. Click on Setup > Serial port... Change the speed (baud rate) to 115200 and click New setting.
Press the reset button on the 1SJ Board as seen below.
The start up information of the 1SJ board should be seen in the Tera Term Virtual Terminal. Take note of the network parameters: AppKey, Device EUI as well as App EUI for configuring the device in the Antares IoT Platform later on.