4. Configuration and Registration of 1SJ Device on Antares IoT Platform

 Inside the application page we have just created, click on the Add a Device at the bottom.

 Create a name for the device and click add.



 Device has been successfully created.



 Click on "Set LoRa" to configure the device.

 Input the network parameters such as App EUI, Dev EUI and App Key as shown in the Tera Term VT previously below.

 After setting the device, sensor data should be pushed to the Antares Platform as seen in the devices page below. Take a look at "How to Use Sensor Data?" to see how the data is extracted.

Congratulations, you have successfully sent data from the 1SJ LoRa device to the Antares IoT Platform.