S-ParameterInductors (coils)

This page provides the S-parameters of inductors (coils).

Download from SimSurfing

You can download the data of multiple selected part numbers at once.

PLEASE CAREFULLY READ THE FOLLOWING RESTRICTIONS BEFORE USING DATA ABOUT THE PRODUCTS ("DATA").
IF YOU DO NOT AGREE TO THE RESTRICTIONS, PLEASE DO NOT USE THE DATA. USE OF ANY PART OF THE DATA INDICATES YOUR COMPLETE AND UNCONDITIONAL ACCEPTANCE OF THE RESTRICTIONS SET FORTH BELOW.

Swipe up or down to change screens

Restrictions on the use of the DATA

  1. You shall not use the DATA for any purpose other than the confirmation of characteristics of the products and the electrical simulation using electronic circuit simulator.
  2. The DATA is provided on an "AS IS" basis without warranty of any kind, either express or implied, including but not limited to the implied warranties of merchantability, fitness for a particular purpose and non-infringement of third party rights.
  3. Murata Manufacturing, Co., Ltd. ("Murata") shall not be liable for any damages, including but not limited to any lost profits, lost savings or other incidental or consequential damages, arising out of or relating to the use of or inability to use the DATA, regardless of any notice of the possibility of such damages, or for any claims made by any third party.
  4. The DATA is subject to change from time to time or products may be discontinued without notice. Please check the latest version.
  5. You acknowledge and agree that the ownership and all intellectual property rights (including but not limited to copyright) of the DATA are held by Murata. You shall not redistribute or reproduce the DATA without prior consent of Murata.
  6. For details about a product, please refer to Murata catalog or approval specifications for the product.
Applicable condition of the DATA for S-parameters
  • Parameters shown in the DATA for S-parameters are typical values which are operated by high frequency small signal at 20 degree C. without DC current. Therefore, please note that under any other conditions above, you may not have adequate results.
  • The DATA may include the data for discontinued products. Please contact us about the latest production status.

Last Update 4/8/2021

Swipe left or right to change screens. View in landscape mode.
Application Series File size
General (Film Type) LQP02HQ_02 ZIP: 2.5MB
LQP02TN_02 ZIP: 2.0MB
LQP02TQ_02 ZIP: 1.8MB
LQP03TQ_02 ZIP: 1.7MB
LQP03HQ_02 ZIP: 3.0MB
LQP03PN_02 ZIP: 0.1MB
LQP03TG_02 ZIP: 2.0MB
LQP03TN_02 ZIP: 2.5MB
LQP15MN_02 ZIP: 1.0MB
General (Multilayer Type) LQG15HN_02 ZIP: 1.8MB
LQG15HS_02 ZIP: 2.0MB
LQG18HN_00 ZIP: 0.4MB
General (Wound Type) LQW03AW_00 ZIP: 0.6MB
LQW04AN_00 ZIP: 3.0MB
LQW04AN_10 ZIP: 0.1MB
LQW04AN_20 ZIP: 0.2MB
LQW04CA_00 ZIP: 0.1MB
LQW15AN_00 ZIP: 3.7MB
LQW15AN_10 ZIP: 1.0MB
LQW15AN_80 ZIP: 4.7MB
LQW15AW_80 ZIP: 0.6MB
LQW15CA_00 ZIP: 0.6MB
LQW18AN_00 ZIP: 1.6MB
LQW18AN_10 ZIP: 0.3MB
LQW18AN_80 ZIP: 2.4MB
LQW18AS_0C ZIP: 0.7MB
LQW2BAN_00 ZIP: 1.0MB
LQW2BAS_00 ZIP: 1.0MB
LQW2BAS_0C ZIP: 1.0MB
LQW2UAS_00 ZIP: 1.3MB
LQW15CN_00 ZIP: 0.1MB
LQW15CN_10 ZIP: 0.5MB
LQW15DN_00 ZIP: 0.1MB
LQW18CA_00 ZIP: 0.2MB
LQW18CN_00 ZIP: 0.2MB
LQW21HN_00 ZIP: 0.1MB
Automotive (Film Type) QP03TN_Z2 ZIP: 2.3MB
Automotive (Multilayer Type) LQG15HZ_02 ZIP: 2.0MB
LQG15HH_02 ZIP: 2.0MB
LQG15WH_02 ZIP: 1.2MB
LQG15WZ_02 ZIP: 1.2MB
LQG18HH_00 ZIP: 0.5MB
Automotive (Wound Type) LQW15AN_0Z ZIP: 3.7MB
LQW15AN_1Z ZIP: 1.0MB
LQW15AN_8Z ZIP: 4.7MB
LQW15CN_0Z ZIP: 0.1MB
LQW15CN_1Z ZIP: 0.4MB
LQW18AN_0Z ZIP: 1.6MB
LQW18AN_1Z ZIP: 0.3MB
LQW18AN_8Z ZIP: 2.4MB
LQW18CN_0Z ZIP: 0.2MB
LQW32FT_0H ZIP: 0.1MB